My Enplug display flashes in and out during use

This can be a symptom of digital signal degradation.

 
You may experience this, if you are:
  • Using a video matrix or converter
  • Connecting your Enplug device to your display with a very long cable
  • Have unshielded electronics between your Enplug device and display
You can resolve this issue by:
  • Directly connecting your Enplug device to your display using a short length of cable
  • Adding a HDMI repeater to boost the signal strength

 

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk