Hardware Setup - Enplug Windows Device Kit - 4 Screens

Overview

Enplug offers Windows media player solutions for setting up custom video walls. This guide will walk you through the hardware setup for a Windows media player connected to 4 screens.

Contents of this guide

Hardware Requirements

Hardware Setup

Hardware Requirements

This Windows device kit supports a maximum of 4 displays (either a 1x4 or 2x2 video wall).

1. AMD Intel Nuc device (and power supply)*

2. 4 displays (and their power cords)

3. 1 HDMI cable*

4. 1 DisplayPort to HDMI cable*

5. 2 USB-C to HDMI cables*

6. Keyboard and mouse 

7. Internet connection

*Items included in Enplug Hardware kit

Hardware Setup

1. Plug the AMD Intel Nuc device and all the displays into power.

2. Connect the HDMI cable from the back of the Nuc to Display 1.

3. Connect the DisplayPort cable from the back of the Nuc to an HDMI port on Display 2.

4. Connect the first USB-C cable from the back of the Nuc to an HDMI port on Display 3.

5. Connect the second USB-C cable from the front of the Nuc to an HDMI port on Display 4.
6. If you are using Ethernet, connect your Ethernet cable to the Intel Nuc device. If you're using Wi-Fi, configure it during the software setup.

7. Turn the Intel Nuc Device on.

8. After booting up, you will be automatically logged in as the Enplug User.

9. Now you're ready to configure the graphics software to complete your video wall. Check out this guide to do so.