Can I use my Enplug device with a component or composite connection?

There are third party devices available that can convert an HDMI signal to composite or component. These are not recommended and may have compatibility issues or cause loss of image quality.

If you are using such an adapter it should:

- Support HDMI input
- Support an input resolution of 1920x1080/60 or 1280x720/60
- Must be a 'scaler' device that converts the signal to a lower resolution
Note: We cannot guarantee compatibility with untested 3rd party hardware.

Enplug Tip: Make sure to check that all of the components in your AV set up, meet the requirements above.

Was this article helpful?
0 out of 0 found this helpful
Powered by Zendesk