Can I use an HDMI matrix or paneled video wall with my Enplug device?

While setting up your Enplug device(s), you may want to use third-party HDMI hardware to diversify the appearance of your screens. Two of the most popular hardware options are HDMI matrixes or splitters, and paneled video walls, described below:

  • A video wall is a special multi-monitor setup that consists of multiple computer monitors, video projectors, or television sets tiled together contiguously or overlapped in order to form one large screen.

  • Matrix switchers route multiple video sources to multiple video destinations.
  • HDMI splitters are used to divide the signal coming from one HDMI input between two or more HDMI outputs.

Your Enplug device should work with a controller that meets the following specifications:

  • HDMI input
  • Supports minimum resolutions of 1920x1080/60 or 1280x720/60

Note: We cannot guarantee compatibility with untested 3rd party hardware. Please contact support if you are having any difficulty with matrix setup.

Enplug Tip: Make sure to check that all of the components in your AV setup meet the requirements above; e.g. if you have multiple devices in your configuration, like a matrix connected to a splitter or multiple matrices connected together, check these for compatibility as well. 

If you're unsure how to install and configure your video wall setup, we would recommend contacting a systems integrator. Please reach out to your account representative or our support team and we can help put you in touch!

Was this article helpful?
1 out of 1 found this helpful
Powered by Zendesk